what intake is this?

what one is it and where do i get it? the intake sold on pfyc.com isnt a clear cover and i wnat the clear cover. its ****y

umm do ya have a pic f it?
might help us to figure out whitch one your talking about

lol opps. im an idiot

http://memimage.cardomain.net/member_images/3/web/279000-279999/279423_10_full.jpg

if your talking his cold air intake that is a thrasher i belive they have them at 3800preformance.
but if not just do a serch for them

I know that the thrashers have been around for a while so you might beabel to find one on Ebay also

i found that intake but all the ones i hvae seen dont have the whole on top to work with the hood

ok those you can get from the smae folks with your hood it is part f the induction kit they have to make those hoods functionabel

you get the and under the hood there is a peice that is etheir molded or bolted on to it to channel teh air from teh hood to the air box.
they were not to bad in price etheir.

i saw that inake they sell with the hood at pfyc.com but its a black top and i want that clear top. im very picky. lol but i cant find the clear cover made for the SS hood

I like the intakes w/the clear top too, especially since I'll be using a True Flow filter, the clear top will let me see when the filter gets dirty.

you might call them on it i belive they had them

If nothign else if you can get a good shot of it and it is flat. Make it

nothing more then a small sheet of Lexan would work . But use lexan not plexie glass

Lexan will bend and is more scratch resestant. So if by chance somethign hits it is will bounce not break

I would liek to find a clear engin cover for the 3800. so i can not feel so bad about buying thecrome valve covers or strips for mine then covering them up.

but have to wait to see what i can come up with on that one

If you want to use the Thrasher box with MPD-Inc's Ramair hood and Plenum you'll have to drill a hole in the top of the Thrasher box. Here's a pic to show you what it looks like.

I have heard from others elsewhere that do not like the thrasher CIA's, have you been happy with your's CMC?

I gutted my factory box but I would like to try a true CIA, I have been torn between the speedbuilt fenderwell or the thrasher CIA kits. The thrasher would look much nicer.

TVW

CMC what coil packs are you running?
Or have you painted your stockers?
I have heard oif folks doing this was wondering if it screwed them up any or if they worked the same still?
i havent found any in the color im trying to find LOL
Go figure i have to be the odd ball on that one

Well when I had my Thrasher box I loved it. It looked awesome, and even though it's not a true Cold Air Induction setup it is much better than the stock box in that it gets the filter out of an ugly black box that has about a 2 1/2' hole to let air in. Also it's great for those that want the ramair effect at the track. Just pop out the drivers headlight and it's a straight path to the filter.

I actually still have my Trasher box but don't have much use for it with the CSC setup.

As for the coil packs I'm running, I'm using the MSD coil packs. It's basically only for looks, I could've gone the painting route but didn't want the gloss of paint on my coils, that and having the letters MSD on your coils just looks cool, lol. But yeah, it's ok to paint the coils, or just about anything else under the hood. The stock coils will be good for as much power just about anyone could concievably want.

kool thanks and what are the plansd for that thrasher box you have?
I might be interasted if your willing to sell
let me know