Electric Water Pump.....
Login | |
|
|
|
|
|
RE: Electric Water Pump..... - 4/25/2005 3:45:19 PM
|
|
|
mickey
Posts: 4813
Joined: 4/23/2005 Status: offline
|
looks nice but OUCH nice price also.279.00
_____________________________
|
|
|
|
|
|
RE: Electric Water Pump..... - 4/25/2005 5:11:49 PM
|
|
|
Patrick
Posts: 484
Joined: 3/17/2005 Status: offline
|
gentlemen...if i may...as some of you may know, i have a non-monte that a have spent the last few years in running a national drag racing series....it is a dodge small block, and i bought a water pump driver from moroso...it was MUCH cheaper than the full electric water pump, and it used the pre-existing pump. it took almost no time to install and im sure they make one for everything..they are fairly universal...it is just a small motor and pulley that mount next to the water pump, and you run a toothed belt from the motor to the pulley that they include.
|
|
|
|
RE: Electric Water Pump..... - 4/25/2005 8:32:57 PM
|
|
|
montejass
Posts: 2745
Joined: 8/14/2004 From: Houston, Texas Status: offline
|
That sounds like a pretty cool add on.... How hard was it to fab a mount for that thing or was it a kit specifically designed for that motor? I'll have to do some hunting around for this one... Good idea... TVW
_____________________________
|
|
|
|
RE: Electric Water Pump..... - 4/25/2005 8:48:11 PM
|
|
|
Patrick
Posts: 484
Joined: 3/17/2005 Status: offline
|
mine came with the motor, the pulley for the pump side, the belt, a bracket, and a TON of bolts of all different length. the directions had a picture of the bracket in like 20 different positions and said below each picture, for instance [picture] small block chevy [pitcure] small block mopar [picture] v6 mopar so on...and then you contorted it to fit and be tight enough with the belt..it works great..it has an attatchement to turn on when the thermostat opens, but i jst wired a switch into my switch board....i prefer to control it, and when i run the only pwoer drawing item that i have is my HV fuel pump. considering the popularity of the 3800 series, i would expect that someone woudl make one for your car, and if not, all would would have to do it have a piece of metal cut that you could use for a bracket, and the bracket is similar to a tesnioning bracket on an old alternator.
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Monte Carlo Prices
Monte Carlo
2006 Monte Carlo
Corvette Forums
Advertising Info
|
Contact Us |
Advertising |
Automotive Links |
Archive |
About Us |
Link To Us |
Monte CarloLinks |
Legal |
Privacy Policy |
© Monte Carlo Forum
The Monte Carlo name is a copyrighted trademark / sales mark of the Chevrolet Motors Division of General Motors.
|