power mirror switch problem

	Monte Carlo Forum Classifieds Photo Gallery Member List Search Contact Sponsors
News Forum FAQ Calendars Recalls TSBs Timeslips Register Login

power mirror switch problem

Printable Version

Monte Carlo Forums >> General Monte Carlo Forums >> General Tech >> power mirror switch problem

Page: [1]

Message

<< Older Topic Newer Topic >>

power mirror switch problem - 11/26/2004 7:55:06 PM

kevin187

Posts: 21
Joined: 11/5/2004
Status: offline

my driver side window was having problems going up so i took my door panel off to see what was goin on and it looks like it just needs greese where metal is rubbing on metal but when i took off my door panel my green wire from my power mirror switch came out and i took out the switch to look at it and the wires are all in some kind of gel stuff so i cant re-connect my green wire again........would it be ok to dig out all the yellow gel to connect my wire? because im thinking that a new switch would be kinda expensive.

Post #: 1

RE: power mirror switch problem - 11/26/2004 9:35:55 PM

montejass

Posts: 2745
Joined: 8/14/2004
From: Houston, Texas
Status: offline

Kevin,

I would if I were you. At this point, what do you have to lose? I would be willing to bet that gel is corrosion preventative grease.

Let us know how it goes.

TVW

_____________________________