RE: Weird loud chirping noise
Login | |
|
|
|
|
|
|
|
RE: Weird loud chirping noise - 4/6/2007 7:44:37 PM
|
|
|
rcohen
Posts: 203
Joined: 11/7/2006 Status: offline
|
bad news, the noise is still there even after being aligned. Im wondering if these guys even looked at my hubs. Gonna take her back in 2morrow
_____________________________
2001 Monte Carlo Ls custom cold ram air intake, 180* T-stat, Ported intake + 65mm TB + spacer & bypass, magnaflow downpipe & cat w/ u-bend delete, dual flowmaster 44's, UD pulley, slp grill, xenon headlights
|
|
|
|
RE: Weird loud chirping noise - 4/9/2007 7:58:30 AM
|
|
|
bilms01
Posts: 113
Joined: 2/3/2007 Status: offline
|
You will notice a change in the sound of a bad hub and bearing in a turn. While you hear it steady slightly turn the wheel and listen for a change. If it gets louder going left the right is most likely the problem and vice versa. Personally I have rarely seen both go bad at the same time, but I have seen it. Had the chirping noise in my 2002 MC pace car...took some WD-40 and sprayed behind the alternator pulley while the engine was running....chirping went away in a few seconds....tells me i will need a new alternator soon.....bearings on their way out! Sometimes the serp belt can cause a chirping noise. After a while the belt can form a glazing on it which can make it slip slightly making the chirp. Belt dressing and WD-40 or similar lube can help but not a perm fix. Try a new belt, it's a lot cheaper than an Alt and if you end up having to replace the alt you will already have a new belt.
|
|
|
|
|
|
|
|
RE: Weird loud chirping noise - 4/9/2007 1:02:40 PM
|
|
|
rcohen
Posts: 203
Joined: 11/7/2006 Status: offline
|
It was the hub bearing, I had it replaced ($400 including labor--ouch!). My tires are brand new and I just had my car aligned so hopefully we are set for awhile. I hate seeing parts for 90$ and than having sumone charge you 280$ for em. Wish I had a lift!
_____________________________
2001 Monte Carlo Ls custom cold ram air intake, 180* T-stat, Ported intake + 65mm TB + spacer & bypass, magnaflow downpipe & cat w/ u-bend delete, dual flowmaster 44's, UD pulley, slp grill, xenon headlights
|
|
|
|
|