How to reset low tire pressure monitor

	Monte Carlo Forum Classifieds Photo Gallery Member List Search Contact Sponsors
News Forum FAQ Calendars Recalls TSBs Timeslips Register Login

How to reset low tire pressure monitor

Printable Version

Monte Carlo Forums >> General Monte Carlo Forums >> Do-It-Yourself >> How to reset low tire pressure monitor

Page: [1]

Message

<< Older Topic Newer Topic >>

How to reset low tire pressure monitor - 7/2/2005 8:45:07 AM

montejass

Posts: 2745
Joined: 8/14/2004
From: Houston, Texas
Status: offline

1. Turn the ignition to ACC or ON and turn the radio off.

2. Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.

3. Press SEE PSCAN up or down arrow to scroll through the main menue.

4. Scroll until the TIRE MON appears on the display.

5. Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.

6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

7. Once the monitor has been reset, scroll until the EXIT appears on the display.

8. Press the TUNE DISP button to exit programming. A chime will be heard to verify exit.

Enjoy!!!

_____________________________

Post #: 1

RE: How to reset low tire pressure monitor - 12/25/2007 9:13:07 AM

Taz

Posts: 2836
Joined: 8/9/2007
From: Windsor, Ontario, Canada
Status: offline

The issue of people with aftermarket radios not being able to follow the usual instructions.
Here's a link to a thread that addresses this issue and gives a solution.

http://www.montecarloforum.com/m_68070/mpage_1/key_/tm.htm#68242

Hope this works for you.

_____________________________