Pulley swap questions

Printable Version

Monte Carlo Forums >> Your Ride >> Nitrous, Super Chargers, & Turbos >> Pulley swap questions

Page: [1]

Login Message << Older Topic   Newer Topic >>

Pulley swap questions - 6/27/2008 3:30:11 PM    Submariner   Posts: 47 Joined: 1/28/2008 Status: offline Ok I''ve done almost everything I had planned on to the car for this year which is everything in my sig. The only thing left is the smaller pulley. I''m going with a 3.5 as recommended from ZZP but I have a few questions. 1. What (if anything) will dropping to a 3.5 do to my MPG. 2. Will I need a smaller belt or will the stock one do fine. 3. When I order the pulley from ZZP I will also order the puller (Rent it that is). My question is do I need to also rent the ZZP backing plate? What is it for? I''m going with the modular set-up because who knows what the future will bring (Rockers / Cam). _____________________________ 04 SS Intimidator #2643 of 4000. Engine mods: ZZP 1.0 PCM, Wizaired CAI, Stainless Plog & 3" downpipe W/High Flow cat, Resonator removed, Autolite 104 Plugs, 180 drilled T-Stat Misc mods: Lowered 1.3 Front 1.5 Rear, Tinted all around, Remote starter Post #: 1

RE: Pulley swap questions - 10/6/2008 7:07:49 PM    chevrolet loyalist   Posts: 5 Joined: 8/8/2008 Status: offline i was also thinking of doing the pulley swap, on my 05ss supercharged, do you recomend zzp, or have any comments or advice? (in reply to Submariner) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Monte Carlo Prices

Monte Carlo
2006 Monte Carlo
Corvette Forums

Top 10 Posters
spacerider 7844 wiz kidd 4940 mickey 4804 solaraslayer 3795 rj 3672 04 intimidat 3602 cowboy6622 3059 taz 2894 montejass 2745 scc24540 2323

New Vendors
AMSOIL - Performance Oil Technology